Posts Tagged ‘Albany-Rensselaer station’

Second Track Opens in Amtrak Empire Corridor

July 14, 2017

Work to install a second track on a CSX route in New York State heavily used by Amtrak has been completed.

The $91.2 million project involved building the second track between Schenectady and Albany in order to eliminate a bottleneck that often delayed Amtrak trains on a 17-mile stretch of single track.

The track went into service on June 26 to conclude the end of the three-year project.

Some trains waited as long as 20 minutes in Schenectady or Rensselaer for opposing traffic to clear.

The track had been removed when the rails were owned by Penn Central.

Overseeing the project were the New York State Department of Transportation, Amtrak and CSX.

In a related development, New York officials released design details for a new $23 million Amtrak station in Schenectady. The station is expected to be completed in late 2018.

The design will feature a wraparound awning outside the building, a weather vane in the shape of New York state on top of a gold dome on the roof, and over-sized arched windows similar in design to those of the 1910-era Union station that once sat at the site.

Earlier this year, Amtrak finished work to improve its station serving Albany-Rensselaer.

That $50.5 million project involved construction of a fourth passenger loading track, extending the loading platforms and upgrading block signals.

Much of that work will benefit the Chicago-New York/Boston Lake Shore Limited, which splits at the Albany-Rensselaer station.

Still to be completed is a $3.5 million state-funded project to rebuild platform elevators and replace the escalators.

Other work that remains in the Empire Corridor to be completed includes making grade crossing and signal improvements south of Rensselaer on the route to New York City.

Most of the funding for the work in the Capitol Region of New York came from the American Recovery and Reinvestment Act of 2009.

The Federal Railroad Administration in a separate allotment had granted New York $33 million to be used to install positive train control technology between Poughkeepsie and Schenectady.

Advertisements

Capital Region Track Work to Finish in Summer

March 22, 2017

Amtrak expects to finish a massive rail improvement project in New York’s Capital Region this summer.

The $163 million program is adding a second track between Albany and Schenectady, New York, in order to eliminate a bottleneck on the single-track route used by the Lake Shore Limited, Empire Service trains, the Adirondack, the Ethan Allen Express and the Maple Leaf.

The work also includes upgrading the signal system and improving grade crossings.

An earlier stage of the project involved lengthening two passenger platforms at the Albany-Rensselaer station, primarily for the benefit of passengers boarding and disembarking from the Lake Shore Limited.

Amtrak officials said the work is nearly finished south of the Capital Region and that the second track between Albany and Schenectady should go into service in late spring or early summer.

A NYDOT spokesman said contractors are still placing ballast on the new track, as well as making deck repairs on the Union Street and Erie Boulevard bridges in Schenectady, cleaning and improving culverts, and removing poles, now that the new signal system is underground.

However, officials say that earlier ides to increase the level of service west and north of the region are uncertain at best.

Michael Franchini, who heads the Capital District Transportation Committee, a government planning organization that oversees the disbursement of federal transportation funds, said there are no serious proposals to extend Empire Service trains now terminating at Albany-Rensselaer to Schenectady or Saratoga Springs.

The New York Department of Transportation will say only that it continues to consider increased service.

Saratoga County residents who are now served by the New York-Montreal Adirondack said that they need additional service to provide them more flexibility in their travel plans.

Some now drive an hour to the Albany-Rensselaer station to take advantage of its higher level of service to New York City.

In a related development, NYDOT officials have been asked to replace the locomotives used between Albany-Rensselaer and New York Penn Station.

The dual model locomotives are able to run on diesel fuel or electric current, but use electric power in the Manhattan tunnels that bring trains into Penn Station.

Replacing the fleet with 25 new locomotives would cost an estimated $250 million.

The current locomotives are old and prone to breakdowns that delay trains.

Albany-Rensselaer Station Expansion Completed

December 8, 2016

Amtrak has completed its expansion at the Albany-Rensselaer, New York, station and the added fourth track is expected to reduce delays by adding additional track capacity.

Amtrak 4The station ranks as one of Amtrak’s 10 busiest in the nation.

A New York Department of Transportation spokeswoman said Amtrak is now using all four tracks at the station and that canopies are being built over the extended platforms.

Carol Breen said the agency and Amtrak are spending $300 million to improve the railroad infrastructure used by Amtrak in the Capital Region.

One beneficiary of the longer platforms will be the Chicago-New York/Boston Lake Shore Limited. On some days the Lake Shore has 14 or more cars.

The Albany-Rensselaer station opened in 2002 and was designed to have two platforms and four tracks. But the fourth track was eliminated as a cost-saving measure.

Other projects being undertaken to improve service include adding a second track between Albany and Schenectady, installing  new signals, and improving some grade crossings.

“The additional capacity has made a big difference in terms of train movements, providing dispatchers with much more flexibility to move trains in and out of the station and minimizing delays to passengers,” said Amtrak spokesman Craig Schulz.